Seasonal tyre storage is also wheel care: the right cleaning, position tracking, inflation, stacking and refitting checks help protect both tyres and rims between changeovers. This reusable checklist explains how to store loose tyres and wheel-and-tyre assemblies, then inspect them before they return to the car.
Overview
Before removing a set of summer or winter tyres, decide whether each tyre will be stored on its wheel or separately. Tyres mounted on alloy wheels require extra care because the wheel finish can be affected by trapped dirt, moisture, unsuitable covers or contact with a hard floor. Loose tyres need different handling because their sidewalls and beads can be distorted by poor stacking or prolonged leaning.
The storage area should be cool, dry, reasonably well ventilated and protected from direct sunlight. Keep tyres away from heaters, boilers, welding equipment, electric motors that may produce ozone, solvents, oils, fuels, acids and other chemicals. Do not leave them outside under a waterproof sheet: condensation can remain trapped even when rain is excluded.
Storage does not restore an old or damaged tyre. Before putting a set away, record its age and inspect for cuts, bulges, cracking, exposed cords, embedded objects and uneven wear. The tyre age and cracking guide can help with the date-code and condition checks. When in doubt, ask a qualified tyre professional to assess the tyre before storage or refitting.
Checklist by scenario
Before removing either set
- Confirm which set is currently fitted and where the replacement set is stored.
- Note the vehicle mileage and take photographs of each wheel if useful for later comparison.
- Check tread condition, sidewall condition, visible damage and unusual wear.
- Mark each position before removal. Use a consistent system such as FL for front left, FR for front right, RL for rear left and RR for rear right.
- Record the tyre brand, size, load rating, speed rating and date-code location if the set may be used on another vehicle or wheel package.
- Use the vehicle handbook or tyre information label to confirm the correct pressure for refitting. Do not assume the pressure printed on the tyre sidewall is the vehicle's recommended operating pressure.
Storing tyres mounted on wheels
- Remove loose dirt and road salt with water and a mild, wheel-safe cleaning product. Follow the wheel manufacturer's cleaning guidance, particularly for painted, polished or coated alloy wheels.
- Dry the tyres and wheels thoroughly. Pay attention to the bead area, valve, spokes, bolt holes and the inner barrel, where moisture can remain.
- Check the wheels for bends, cracks, corrosion, missing balance weights and damaged valve stems. A wheel that loses pressure or has suffered an impact should be assessed before storage.
- Inflate the assemblies to the vehicle manufacturer's recommended cold pressure unless the tyre or vehicle manufacturer gives different storage instructions. Recheck pressure before fitting because storage does not prevent gradual air loss.
- Fit breathable tyre or wheel covers if desired. Covers should be clean, dry and loose enough to avoid trapping moisture. Avoid airtight plastic wrapping.
- Store each assembly horizontally in a stable stack, or hang it only from a purpose-designed wheel hanger that supports the wheel safely. Do not hang an assembly by the tyre sidewall or valve.
- Keep the stack away from sharp edges, doorways, heavy objects and areas where it could be knocked over. Avoid making the stack higher than can be safely handled.
Storing assemblies on wheels generally makes sense for a seasonal wheel-and-tyre package, but the exact method should follow the tyre and wheel manufacturer's guidance. A heavy assembly should not be moved by dragging it across the floor, which can damage a tyre or scratch a rim.
Storing loose tyres without wheels
- Clean and dry the tyres, then inspect both sidewalls and the tread grooves.
- Keep each tyre labelled with its previous vehicle position. If the tyres are being rotated at the next changeover, record that intention rather than relying on memory.
- Store loose tyres upright on a clean, dry surface. Turn them slightly from time to time if they will remain in storage for an extended period.
- Do not stack loose tyres flat for long-term storage unless the manufacturer specifically permits that arrangement.
- Do not hang loose tyres from hooks, ropes or narrow supports. Pressure on one area of the sidewall can cause distortion.
- Use a breathable cover to reduce dust while allowing air circulation. Never seal damp tyres in non-breathable plastic.
Simple position-tracking template
Write the following on a label or in your vehicle maintenance notes:
- Vehicle: make, model and registration or fleet number
- Season: summer or winter
- Storage date: day, month and year
- Position removed: FL, FR, RL or RR
- Tyre details: size, brand, model, load and speed rating
- Condition notes: tread wear, pressure issue, wheel damage or repair history
- Next action: refit, rotate, inspect professionally or replace
Label the tyre itself or its cover, not just the storage location. If a label could detach, use a second record and photograph the markings.
What to double-check before refitting
Retrieve the correct set early enough to inspect it in good light. Never fit a tyre simply because it was safe at the previous changeover; condition, age and storage handling can change the decision.
- Confirm fitment: Match the tyre size, load rating, speed rating and construction to the vehicle requirements. For wheel-and-tyre packages, also confirm PCD, offset, centre bore and clearance. See the wheel and tyre fitment checker before fitting an unfamiliar set.
- Inspect the tread: Look for uneven wear, cracking, cuts, exposed objects and damage in the grooves. Measure tread where appropriate rather than judging only by appearance.
- Inspect the sidewalls: Check for bulges, scuffs, puncture repairs, cracking and deformation. Any structural-looking damage needs professional assessment.
- Inspect the rims: Look for cracks, bends, corrosion around the bead seat, damaged threads and missing centre caps or valve components.
- Check pressure: Set all tyres cold to the vehicle's specified pressure, including the spare where applicable. Recheck after installation if a pressure monitoring system requires calibration.
- Check direction and position: Directional tyres must rotate in the marked direction. Asymmetric tyres must be fitted with the correct side facing outward. Use your position record when refitting.
- Secure the wheels: Clean mating surfaces, fit the correct fasteners and tighten them to the vehicle manufacturer's specification. A torque wrench is preferable to relying on feel.
- Finish with a short inspection: After fitting, check that no tyre or wheel contacts the suspension, bodywork or brake components. Drive cautiously at first and stop if there is vibration, pulling, unusual noise or pressure loss.
For more detail on tyre condition, use the tread depth and age inspection checklist. If the stored set is a new purchase, confirm all specifications with the tyre size and fitment guide before installation.
Common mistakes
- Leaving tyres in direct sunlight: Sunlight and heat are poor storage conditions, even when the tyres are covered.
- Storing them beside chemicals: Oil, fuel, solvents and some workshop products can damage rubber or finishes.
- Using airtight bags: Sealing in moisture can encourage corrosion on wheels and leave tyres damp.
- Forgetting the original position: Unmarked tyres make future rotation and wear diagnosis less precise.
- Stacking loose tyres flat: This can place unnecessary load on the lower sidewalls and make handling unsafe.
- Ignoring the rims: Seasonal storage is a useful opportunity to find bent wheels, bead-seat corrosion and damaged valves.
- Refitting without checking fitment: A wheel that appears similar may still have a different PCD, offset, centre bore or brake clearance.
- Assuming storage replaces inspection: Stored tyres still need pressure, age, damage and tread checks before use.
When to revisit
Use this checklist twice a year: once when removing the current seasonal set and again when retrieving it. Revisit it sooner after a puncture, kerb impact, long period of inactivity, change of vehicle, change of storage location or purchase of a different wheel-and-tyre package.
Before each main seasonal changeover period, check the latest instructions from your tyre and wheel manufacturers and the vehicle handbook. Requirements can differ for run-flat tyres, specialist performance tyres, commercial or van tyres, and wheels with particular finishes. Storage conditions also deserve a fresh look if the garage has become hotter, damper, more exposed to sunlight or more crowded.
Action list: choose a dry storage location, clean and label the set, record its condition, store it in the correct orientation, and book a professional inspection if any damage or fitment question remains. When the next changeover arrives, retrieve the set, verify the markings, inspect every tyre and rim, set cold pressures, tighten fasteners correctly and complete a cautious post-fit check.