Tyres can look serviceable while hiding dangerous wear, age-related cracking, or internal damage. This guide explains how to check tread depth, read the tyre date code, recognise damage, understand legal-limit caveats, and decide when replacement is the safest option.
Overview
There is no single test that determines whether a tyre is safe. A proper inspection combines tread depth, wear pattern, age, inflation condition, and visible damage. Check all four tyres, including the inner shoulders where wear can be difficult to see. If your vehicle has a spare tyre, inspect that as well.
Use the table below as a practical comparison, not as a substitute for your region’s regulations or a professional inspection. Legal minimum tread depth varies by jurisdiction, vehicle category, and tyre position. A tyre can also need replacing before it reaches the legal limit if it is cracked, bulged, punctured in an unsafe area, or unevenly worn.
| Approximate tread condition | What to look for | Recommended action |
|---|---|---|
| Well above the legal limit | Clear grooves, even wear, no exposed cords or serious damage | Continue routine checks and maintain the correct pressure |
| Approaching the legal limit | Shallower grooves and visible wear near the tread indicators | Plan replacement and check local inspection requirements |
| At or below the legal limit | Tread is level with the wear bars or measurement is at the local minimum | Replace promptly; do not rely on appearance alone |
| Unsafe regardless of tread depth | Bulges, deep cuts, exposed cords, severe cracking, or a suspected internal failure | Do not continue driving; seek professional advice or recovery |
For a reliable measurement, use a tread-depth gauge at several points across each tyre: inner, centre, and outer tread. Measure in more than one groove and note differences between tyres. A single reading from the centre of the tread can miss shoulder wear.
How to compare options
When deciding whether to keep or replace a tyre, compare five areas rather than focusing only on tread depth:
- Remaining tread: Measure rather than guessing. Wear bars built into the main grooves provide a quick visual warning, but they do not replace a gauge or knowledge of local requirements.
- Wear uniformity: Even wear is generally easier to assess and manage. Wear on one shoulder, cupping, scalloping, or a band around the tyre may point to incorrect pressure, alignment, worn suspension, wheel imbalance, or a fitment issue.
- Age: Rubber compounds change over time, even when a vehicle is driven infrequently. Age should be considered alongside storage conditions, climate, usage, and the tyre maker’s recommendations.
- Damage: A puncture, sidewall cut, bulge, or crack can be more important than the remaining tread. Sidewall damage and bulges should be treated as urgent warning signs.
- Vehicle requirements: Any replacement should match the vehicle’s approved size, load index, speed rating, construction, and seasonal requirements. For help confirming those markings, see how to read tyre sizes and confirm fitment.
Do not compare tyres by tread depth alone when buying replacements. Two tyres with similar measurements can differ in wet grip, noise, handling, load capacity, and suitability for the vehicle. The tyre-label guide explains the information commonly used to compare these characteristics.
Feature-by-feature breakdown
Wear bars and tread depth
Most passenger-car tyres have small raised bars across the main grooves. These are tyre wear indicators. When the surrounding tread is level with a bar, the tyre is at its wear-warning point and should be assessed for replacement. Check several grooves because tyres can wear unevenly.
Tyre date code explained
Look for the letters “DOT” or the manufacturer’s identifying markings on the sidewall. The final four digits in a typical modern date code identify the production week and year. For example, “3522” indicates manufacture in week 35 of 2022. The complete code may appear on only one sidewall, so you might need to inspect the inner face of the tyre.
The date code is not, by itself, an automatic expiry date. Instead, use it to establish the tyre’s age, then inspect the rubber and follow the tyre manufacturer’s age guidance. Older tyres deserve closer checks for hardening, surface cracking, deformation, and loss of condition. A tyre fitted long ago may have a different service age from one stored unused, so keep purchase and fitting records where possible. The related tyre age and date-code guide provides a more detailed inspection reference.
Cracking, bulges, and cuts
Fine surface lines can appear with age, weather exposure, or unsuitable storage. Cracks that extend into grooves, run along the sidewall, or are accompanied by deformation require professional assessment. A bulge usually indicates damage to the internal structure and is not repaired by inflating the tyre. Do not drive normally on a tyre with a sidewall bulge.
Punctures and repairs
A puncture is not automatically a reason to discard a tyre, but repairability depends on its location, size, condition, and whether it was driven while underinflated. Repairs should be assessed and carried out by a qualified tyre professional. Punctures in or near the sidewall, multiple repairs, or evidence of internal damage commonly require replacement rather than repair.
Uneven wear
Replace the worn tyre if it has reached the relevant limit, but also investigate the cause. Check pressure against the vehicle maker’s specification, inspect alignment and suspension, and confirm that wheels are balanced. Replacing tyres without correcting the underlying issue can cause the replacement set to wear in the same way.
Best fit by scenario
Before a long journey: Measure tread, inspect sidewalls, check for embedded objects, and set pressures using the vehicle manufacturer’s cold-pressure specification. The pre-trip tyre checklist can be used as a printable routine.
Before an inspection or test: Check the legal tread requirement for the country or region where the vehicle is registered. Look closely at the inner shoulders, because an apparently healthy outer tread does not confirm the full tyre is compliant.
When replacing one tyre: Confirm that the replacement matches the required size, load index, speed rating, construction, and seasonal type. Ask a tyre professional whether axle pairing or replacement of two tyres is more appropriate for the vehicle.
For an older, low-mileage car: Give age and cracking more weight. Low mileage does not prevent rubber from ageing, particularly when tyres are exposed to sunlight, heat, moisture, or long periods at incorrect pressure.
For seasonal tyres: Inspect tyres when removing them from storage and before refitting them. Record their position, date code, tread measurements, and storage condition. The seasonal tyre storage guide covers practical ways to reduce storage-related damage.
When to revisit
Make tyre inspection part of a repeatable routine rather than waiting for a warning. Check pressures at least according to the vehicle maker’s maintenance schedule and inspect tread and sidewalls monthly, before long trips, after hitting a pothole or kerb, and whenever the vehicle develops vibration, pulling, or unusual noise.
Revisit this guidance when your region changes its legal tread rules or inspection-test requirements, when the tyre manufacturer updates age recommendations, or when you change vehicle, wheel size, or tyre type. If you are comparing replacements, review the vehicle handbook and approved fitment before you compare premium and budget tyres.
Simple replacement workflow: measure several tread points; read and record each date code; inspect both sidewalls and the full tread; check for uneven wear; verify pressure and vehicle fitment; then ask a qualified tyre professional to assess any damage or uncertain result. If you see a bulge, exposed cord, deep sidewall cut, or suspected internal failure, stop using the tyre and arrange professional help rather than driving to a workshop.